Gsm Jony Flash Files

TESTED ALL FREE FLASH FILES,ALL BRANDS,HANG ON LOGO,LCD BLANK,CAMERA FIX,INVALID IMEI FIX,MONKEY VIRUS CLEAN,FIRMWARES DOWNLOAD TRUSTED SITE WHATSAPP# +923006504227

Breaking

Tuesday, 28 January 2020

22:56

OPPO A33F 16GB MSM8916 v5.1.1 Tested Flash File 1000% Ok

OPPO A33F 16GB MSM8916 v5.1.1 Tested Flash File 1000% Ok
OPPO A33F 16GB MSM8916 v5.1.1 Tested Flash File Download
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Lcd Display Black Blue White All Error Fix File
OPPO A33F 16GB MSM8916 v5.1.1
OPPO_A33f_A33fEX_11_170531_2017-04-01
Device : Oppo A33f
Operation : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM46)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Normal
Reading Device Information...OK
Device : OPPO A33f [msm8916] [A33]
Software : A33fEX_11_170531, eng.root.20170531 [Wed May 31 19:14:23 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-04-01
Reading [modem]...Done
Reading [DDR]...Done
Reading [sec]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [oppodycnvbk]...Done
Reading [oppostanvbk]...Done
Reading [LOGO]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [system]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [DRIVER]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\OPPO_A33f_A33fEX_11_170531_2017-04-01\
Operation Finished.
QcFire Ver. 5.2
Flash File Free Download
Download Link::: Link
Sp Flash Tool Latest Download
Download Link::: Link
Direct Download Link No Ads
0
By at No comments:
Labels:
22:45

Call Recorder Android APK Tested Free 1000% Ok

Call Recorder APK Tested Free 1000% Ok
Call Recorder APP Tested Free Download
Call Recorder - Super Recorder FULL Tested
Automatic Call Recorder Hide App Pro callBOX_v5.9
Call Recorder - Cube ACR
Super Backup SMS and Contacts
Call Recorder APK Tested Free 100% Ok
Download Link::: Link
Direct Download Link No Ads
0
By at No comments:
Labels:

Saturday, 25 January 2020

23:29

Samsung GT I9060 v4.2.2 Tested Flash File Free 1000% Ok

Samsung GT I9060 v4.2.2 Tested Flash File Free 1000% Ok
Samsung GT I9060 4Files v4.2.2 Tested Flash File Free 1000% Ok
Samsung GT I9060 4Files v4.2.2 Tested Flash File Free Download
4Files

I9060XXUAML9-4Files-4.2.2
Samsung GT I9060
I9060DDUANJ1_I9060ODDANJ1_INS
 FLASH INSTRUCTIONS:
  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check 'Repartition' option.
  3. If you have one file firmware, then you must check 'Use one package file' option.
  4. Check flashing options if needed (Repartition, EFS clear, Boot update).
  5. Power on the phone in download mode (turn off phone, hold Volume Down + Home + Power).
  6. Connect the phone to PC with USB cable, install drivers if needed.
  7. Press 'Flash' button. 
Operation: Flash
Selected model: GT-I9060
Software version: 39.0
File analysis... OK
Total file size: 0x59ADF214 (1434 Mb)
Searching USB Flash interface... COM56 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.lfs... OK
Sending dt-blob... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending cache.img... OK
Sending hidden.img... OK
Sending BcmCP.img... OK
Flashing done (time - 00:06:18)
Done with Samsung Tool PRO v.39.0
Samsung GT I9060 v4.2.2 Flash File 
Download Link::: Link
Samsung GT I9060 4Files Flash File
Download Link::: Link
Odin All Flash Tool Latest Free 100% Ok
Download Link::: Link
Samsung Usb Driver All Latest Tested Free 100% ok
Download Link::: Link
0
By at No comments:
Labels:

Friday, 24 January 2020

23:20

Samsung J7 SM G610F v8.1.0 v6.0.1Tested Flash File Free 1000% Ok

Samsung J7 SM G610F v8.1.0 Tested Flash File Free 1000% Ok
Samsung J7 SM G610F  v6.0.1Tested Flash File Free Download
Samsung J7 SM G610F Tested Combination File
Samsung J7 SM-G610F ENG Modem File
Samsung J7 SM-G610F FRP SBoot File
samsung sm-g610f Boot file
Samsung SM-G610F Custom Recovery 6.0.1 File
samsung sm-g610f Custom Recovery CWM 6.0.1 file
Samsung SM-G610F ENG Boot File
Samsung SM-G610F ENG Modem File
samsung sm-g610f frp reset file
Samsung SM-G610F FRP SBoot 8.1.0 File
Samsung SM-G610F FRP SBoot File
samsung sm-g610f Root 8.1.0 file
File analysis... OK
Total file size: 0xFEBBA1A6 (4075 Mb)
Searching USB Flash interface... COM55 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin... OK
Sending modem_debug.bin... OK
Sending cache.img.lz4... OK
Sending hidden.img.lz4... OK
Flashing done (time - 00:04:02)
Done with Samsung Tool PRO v.39.0
Samsung J7 SM G610F v8.1.0 Flash File
Samsung J7 SM G610F v6.0.1 Flash File
Samsung J7 SM G610F Combination File
samsung sm-g610f Custom Recovery CWM 6.0.1 file
Samsung SM-G610F Custom Recovery 6.0.1 File
Samsung J7 SM-G610F ENG Modem File
Samsung SM-G610F ENG Modem File
Samsung SM-G610F ENG Boot File
samsung sm-g610f frp reset file
Samsung SM-G610F FRP SBoot File
Samsung J7 SM-G610F FRP SBoot File
Samsung SM-G610F FRP SBoot 8.1.0 File
samsung sm-g610f Root 8.1.0 file
samsung sm-g610f Boot file
Odin All Flash Tool Latest Free 100% Ok
Download Link::: Link
Samsung Usb Driver All Latest Tested Free 100% ok
Download Link::: Link
0
By at No comments:
Labels:
21:38

Haier G10 MT6572 v4.4.2 Tested Scatter Flash File Free 1000% Ok

Haier G10 MT6572 v4.4.2 Tested Scatter Flash File 1000% Ok
Haier G10 MT6572 v4.4.2 Tested Scatter Flash File Download
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Lcd Display Black Blue White All Error Fix File
Haier G10 MT6572 v4.4.2
MT6572__Haier__G10__G10__4.4.2__ALPS.KK1.MP7.V1
Card found : S/N : 7025390D , v0137
Chinese Miracle II  [MTK module] v 1.58
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Device boot not done
Check Drivers
Try again 
Boot Error!
Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473AFAABBE0A52D3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473AFAABBE0A52D3
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x08730D1FAE15FDF22601C034458FA952
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ... 
Brand     : Haier
ProdName  : G10
ProdModel : G10
Device    : G10
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1
[Read Ok] : preloader_keytak72_cwet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / keytak72_cwet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 782 MiB
Scatter saved to : G:\MT6572__Haier__G10__G10__4.4.2__ALPS.KK1.MP7.V1\
All done!
Done!
Elapsed: 00:03:54
Reconnect Power/Cable!
Flash File Free Download
Download Link::: Link
Sp Flash Tool Latest Download
Download Link::: Link
Direct Download Link No Ads
0
By at No comments:
Labels:
21:27

OPPO R12 Pro MT6580 v6.1 Tested Scatter Flash File Free 1000% Ok

OPPO R12 Pro MT6580 v6.1 Tested Scatter Flash File Free 1000% Ok
OPPO R12 Pro MT6580 v6.1 Tested Scatter Flash File Free Download
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Lcd Display Black Blue White All Error Fix File
OPPO R12 Pro MT6580 v6.1
MT6580__R12_Pro__R12_Pro__R12_Pro__6.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 70010053313030303408D15C208F6205
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 40001
[eMMC] : FLASH_CID : 70010053313030303408D15C208F6205
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E4000000
[eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
DEV RID    : 0x08730D1FC40FE49082A2F7A1F70134D8
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ... 
xGPT : Normalize settings Ok!
Brand     : R12 Pro
ProdName  : R12 Pro
ProdModel : R12 Pro
Device    : R12 Pro
AndroidVer: 6.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1107 MiB
Scatter saved to : G:\MT6580__R12_Pro__R12_Pro__R12_Pro__6.1__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\
All done!
Done!
Elapsed: 00:06:52
Reconnect Power/Cable!
Flash File Free Download
Download Link::: Link
Sp Flash Tool Latest Download
Download Link::: Link
Direct Download Link No Ads
0
By at No comments:
Labels:
21:17

TECNO B1F MT6580 v8.1.0 Tested Scatter Flash File 1000% Ok

TECNO B1F MT6580 v8.1.0 Tested Scatter Flash File 1000% Ok
TECNO B1F MT6580 v8.1.0 Tested Scatter Flash File Download
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Lcd Display Black Blue White All Error Fix File
TECNO B1F MT6580 v8.1.0
MT6580_EMMC_O11019__8_1_0_TECNO_TECNO B1f_2020_01_14_14_42)
Action : Boot Info.
 Selected Tecno:B1
 Exe version: Avengers Box MTK 0.6.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM69)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+8192Mb) KSI 0x464d41454538 
 EMMC FW VERSION: 23:00:00:00:00:00:00:00
 EMMC CID: 700100464D41454538 : 00000000000000
 EMMC UA SIZE: 0x3a8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a8c00000      [14.637 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM71)
 Build ID: O11019
 Display ID: B1f-F8018I-OGo-190929V76
 Version: 8.1.0
 Build Date: Sun Sep 29 09:07:03 CST 2019
 Brand: TECNO
 Device: TECNO-B1f
 Model: TECNO B1f
 Manufacturer: TECNO MOBILE LIMITED
 This phone have FRP partition.
 Wait untill phone will start charging.
 [0]All done.
Flash File Free Download
Download Link::: Link
Sp Flash Tool Latest Download
Download Link::: Link
Direct Download Link No Ads
0
By at No comments:
Labels:
21:02

Qmobile LT360 MT6572 v4.4.2 Tested Scatter Flash File 1000% Ok

Qmobile LT360 MT6572 v4.4.2 Tested Scatter Flash File 1000% Ok
Qmobile LT360 MT6572 v4.4.2 Tested Scatter Flash File Download
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Lcd Display Black Blue White All Error Fix File
Qmobile LT360 MT6572 v4.4.2
MT6572__alps__LT360__zl9e_xdf_p13_qmobile_lt360_d_emmc32_4_ddr1_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D003F6417C4CF81
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D003F6417C4CF81
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x08730D1FA1FD91AD3BB2DC1A6ECDAF54
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ... 
Brand     : alps
ProdName  : LT360
ProdModel : LT360
Device    : zl9e_xdf_p13_qmobile_lt360_d_emmc32_4_ddr1_b15_fl
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.Band1.2.5.V1.3
[Read Ok] : preloader_m72_emmc_s6_pcb22_ddr1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / m72_emmc_s6_pcb22_ddr1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 529 MiB
Scatter saved to : G:\MT6572__alps__LT360__zl9e_xdf_p13_qmobile_lt360_d_emmc32_4_ddr1_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3\
All done!
Done!
Elapsed: 00:03:47
Reconnect Power/Cable!
Flash File Free Download
Download Link::: Link
Sp Flash Tool Latest Download
Download Link::: Link
Direct Download Link No Ads

0
By at No comments:
Labels: